manual powder coating system

electrostatic manual powder coating system 1.pulse powder coating equipment 2.quick color changes

electrostatic manual powder coating system

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths,ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China.

China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit

COLO-660 Electrostatic Powder Manual Coating Equipment,is designed exclusively for electrostatic coating with powder.

660 Series Features and Specifications: 0-100 Digital Adjustable KV Fully Adjustable Amperage Pulse Power Technology for beating Faraday Cage Effect. Able to cut Pulse Power on and off With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air. Comes with Full Array of Nozzle Assortment. Field Tested and Proven to operate in the toughest environments. Comes with different array of delivery systems:Hope Feed - 45L (samll hopper also could availbale) Because this system was designed with the Pulse Power Built in its Electronics it is specially balanced for the maximum spray capability with the Smoothest Finish Possible.

Typical characteristics:

1,Control unit  has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts.Easy to operate.

2,suitable for the coating of every workpiece. simple, flat workpieces;workpieces with complicated shapes;  the over-coating of workpieces which are already coated.

3,Pulse coating system

1). Save powder by 20% compare to Electrostatic Coating ,for the average thickness of our products is 60 μm compare to 70 μm of the latter.

2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.

3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine .

Configuration:

A control unit power supply cable

- A air filter

- A air pressure regulator

- A fluidized powder hopper

- A plug-in injector

- An manual powder gun with gun cable, powder

hose, rinsing air hose and standard nozzle set.

- Pneumatic hoses for conveying air (red), supplementary

air (black) and fluidizing air (black)

powder hose

Ground wire

Electrical data
Mains input voltage	100-240 VAC
Operating frequency	50-60 Hz
Input power	50W
Nominal output voltage (to the gun)	max. 12 V
Nominal output current (to the gun)	max. 1 A
	IP54
Ambient temperature range	0°C - +40°C (+32°F - +104°F)
Max. operating temperature	85°C (+185°F)
Approvals	CE
Pneumatical data
Compressed air connection	1/4" male quick release
Max. input pressure	10 bar / 145 psi
Min. input pressure (while unit in operation)	6 bar / 87 psi
Max. water vapor content of the compressed	air 1.3 g/m³
Max. oil vapor content of the compressed air	0.1 mg/m³
Packing Dimensions
Length	120CM
Width	79CM
Height	73CM
Weight	approx. 55kgs
Connection Description
1.1 Air In	Compressed air connection (6-10 bar / 87-145 PSI)
2.1 Power	Mains cable connection (100-240 VAC)
2.2 Gun	Gun cable connection
1.4	Electrode rinsing air connection
1.3	Pict Supplementary air connection
1.2	Pict Conveying air connection
Grounding connection	Pict

Packing Dimensions

Model No. COLO-660

Length:  69cm

Width:  52cm

Height:  56cm

Weight:  37 kgs.

COLO-660  NEW intelligent powder coating equipment

For the convenience of users, can choose the corresponding use mode through intelligent button

 

Manual coating equipment Function description

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control

Unit

The process of the coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths,ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China.

China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit

We also can supply powder parts replacement of famous powder coating machine , same function,but times lower price!!!

manual powder coating system